CRS Sender Batt transmitter / duplicater
CRS Sender Batt transmitter/duplicator is a 3-channel device that can copy up to 4 original remote controls.

Description
The CRS Sender Batt transmitter is a transmitter / duplicater that can fully copy up to 4 original remote controls with fixed code.
The transmitter works on the frequencies 433.92 MHz and 868.3 MHz.
Frequency, power, transmission distance, and other parameters can be easily configured for any channel using the "Prog" button: channels are independent of each other, so they can be programmed to transmit different frequencies (e.g. 433.92 MHz and 868.3 MHz etc.).
By configuring on each channel an appropriate power, interference and collisions can be minimized, or the transmission distance can be great: when selecting the maximum transmitted power level, the transmission-reception distance is very large.
The device can be used to open a gate, a door garage or to lift the traffic barrier, as well as other home automations.
There are 4 valid channels:
- Channel 1: when switch/button 1 is pressed
- Channel 2: when button 2 is pressed
- Channel 3: when both buttons, 1 and 2 are pressed
- Channel 4: when a current drop is detected
Battery type: CR2032 3V
When 1 or both external switches are pressed, the device begins to transmit the code learned in advance or a code at random, programmed from the factory.
When the power supply suddenly interrupts and falls to 0V, the device warns the alarm/monitoring system to the current. In normal conditions, the voltage is between 9-24 Vdc.
Technical specifications
| Product code | CRSSENDERBATT |
|---|