TRD receiver RX MULTI 300-868
The TRD RX MULTI 300-868 receiver is a receiver used for programming remote controls with fixed code and jumper, compatible with a wide range of automations.

Description
The TRD receiver RX MULTI 300-868 is used for programming several types of remote controls, with fixed code or rolling code. The receiver is compatible with a wide range of automations and works on frequencies ranging from 434-868 Mhz.
Brand selector
With the 8-bit dip-switch, the user can set a certain combination, depending on the remote control brand. (The difference between brands is made according to the compatibility table).
The led and the learning button
The TRD RX MULTI receiver has 2 independent channels. Each channel has a learning button: S1, S2 and L1, L2.
Choice of power supply
The receiver works at 12-30 V power. However, it is recommended to be changed depending on the power supply. If this is more than 24 V, close the 2 and 3 pins. If the voltage is below 24 V, close the pins 1 and 2.
Radio card detachable
The memory card may be removed from the device for reading, copying or saving data.
How to enter or delete data from remote control
Recruiting a button or remote controls
- Select the appropriate brands to be inserted into the dip switch;
- Press the learning button. The led will light up.
- Press the remote button, which you want to join. The led will blink four times, meaning that the memory on the receiver was successfully made;
- Repeat Step 2 for the re-rolling of another button.
Complete deletion of information from memory card
Hold the learning button until the led starts blinking. Keep until the led is out. The whole memory will be starred forever.
NOTE: The deleted data from the memory can no longer be retrieved.
List of compatibilities
Technical specifications
| Product code | TRDRXMULTI |
|---|