CRS UniLock universal door opening device
CRS UniLock universal door opening device is a multi-frequency device, used to activate electrical locks

Description
CRS UniLock is a universal door closure device, used to operate doors with electrical locks. With very small dimensions, the radio receiver supports a wide range of frequencies, between 433.92 - 868.8 MHz and is compatible with most fixed code or rolling code remote controls on the market.
Installation mode:
Two cables connect in parallel with the switch used to activate the electrical locks. When a known remote control code is transmitted, the Unilock device short-circuits the power cables (equivalent to a "Push" button). Thus, the electric current that breaks the lock will open it. The current is up to 3.2 Aac or 3.5 Ac, and the voltage is 18 Vac-24 Vdc.
Frequency can be set by the Prog button. At the same door openers, the device can store up to 60 different remote controls, even from different brands, with fixed code or jumper. The number of remote controls memorized depends on the complexity of the code. So you can remember 60 remote controls of 12 bits or 40 remote controls Keeloq with rolling code.
Main users UniLock device:
- Opening a main entrance with almost any kind of remote control
- Opening a pedestrian access gate
- Opening any system that uses an electric lacquer
Memoranda of codes
- Press the "Prog" button twice to activate the mode of learning. Now you can press the button on the existing remote control for 10 seconds to memorize it. When each code is stored, the 10 sec period is reactivated.
- If the code is stored, the led will emit two light signals. On 3 signals issued, the code is already memorized. At six signals, memory is full.
Delete existing codes:
- Press the "Prog" button three times. The 10-second transmission period from the remote control shall be activated and shall be switched off. The led will blink four times, indicating the deletion of the codes.
- For full memory emptying, press the "Prog" button 10 times. The led will blink ten times, then press "Prog" three more times.
| Technical characteristics: | |
| Frequency of operation: | 433.92MHz, 868.3MHz, 315MHz, 288MHz, 300MHz, 303MHz, 306MHz, 310MHz, 318MHz, 330MHz, 390MHz, 403.55MHz, 418MHz. |
| BP: | 9-24 Vdc; 9-18 Vac |
| Consumption: | 4-20 mA |
| Number of remote controls supported | up to 60 (depending on code) |
| Signal transmission distance: | 50 m (433.92 MHz); 30 m (868.3 MHz) |
Technical specifications
| Product code | CRSUNIREC |
|---|