Remote controls 021 450 60 70

CRS Sender multifrequency transmitter/duplicator

CRS Sender multifrequency transmitter/duplicator is a small duplicater that can copy any remote control with fixed code.

CRS Sender multifrequency transmitter/duplicator

Description

CRS Sender multifrequency transmitter (duplicator) is capable of copying any original remote control with fixed code, with frequencies ranging from 433.92 MHz to 868.3 MHz.

Universal transmitter characteristics:

  • The transmission distance and other parameters can be easily configured for any user using the "Prog" button.
  • By changing the transmission, interference and collisions can be minimized, or the transmission distance can be increased.
  • A multi-frequency transmitter is used for a wide range of applications, such as opening automated ports, garage doors, lifting traffic barriers, as well as other home automation.
  • The radio transmitter can be connected via a switch to an external power supply.
  • It supports a wide range of voltages, from 7-35 Vac and 5-24 Vdc.
  • When the switch is pressed/ closed, the device is powered up and starts transmitting the code that was previously stored.

Transmitter configuration:

  • To change the initial configuration (433.92 MHz and transmit 8 codes), quickly press the "Prog" button a number of times equivalent to the value of the parameter you want to modify; The led will blink, announcing the current value of the parameter;
  • Press the "Prog" button again, a number of times equivalent to the desired value. The led will blink a number of times indicating the new value;
  • If the programming failed, the led will issue a long signal;
  • If used inside with another transmitter or more, avoid interference, reducing to a minimum the transmitted power and code number;
  • There is the possibility of adding time between codes, to give the opportunity and other systems to work simultaneously. Check the tolerance of the device to add extra time between codes.

Memory of a remote controls:

  • Press the "Prog" button twice, activating the memory mode;
  • Press the remote button for 10 seconds;
  • The led will blink twice if the copied remote control has a fixed code and 4 times for the jumper code;
  • Apart from duplication, a new code of 12 or 24 bits can also be initialized. In this case, press the "Prog" button a number of times equivalent to the channel, then another 10 times;
  • Finally, press the "Prog" button 1 date (for 12 bits) or 2 times (for 24 bits).

Technical specifications

Product codeCRSSENDER

Send a request

Fill out the form and a specialist will contact you as soon as possible.

Cookie settings

Choose which categories you accept. Strictly necessary cookies are always active; the others start only with your consent and you can change them at any time. Cookie policy

Make the site work: keep your cookie choice. They can't be disabled.

What we store (1)
  • erp-consent · This site · Stores your cookie choice. Duration: 365 days.

Remembers recently viewed products so you can find them easily. The data stays only in your browser.

What we store (1)
  • erpShop.seen · This site · Recently viewed products. Duration: until you delete them.

Shows us which pages are visited and how the site is used, so we can improve it (Google Analytics).

What we store (2)
  • _ga · Google Ireland Ltd. (Google Analytics) (third party) · Distinguishes visitors for visit statistics. Duration: 2 years.
  • _ga_RDHGHTRCC5 · Google Ireland Ltd. (Google Analytics) (third party) · Keeps the state of the visit session. Duration: 2 years.
External suppliers (1)

Operator: IMPOR GROUP SRL · gdpr@impor.ro