THM-K06 remote control kit
Kit remote control THM-K06 is a radio control set composed of a receiver unit with a channel and a two-button remote control.



Description
The THM-K06 remote control kit is composed of a receiver unit with a channel and a remote control with 2 buttons. The unit allows 30 remote controls to be rolled in.
The remote control kit works in two ways: monostable and bestable.
Programming using the THM-K06 remote control kit:
The mode of action of the relay is set according to the position of the inner jumper as follows:
- Position 1-2 - Bistable mode - the first button on the transmitter is used for the control of the relay and remains activated until a new button is pressed.
- Position 2-3 - Bistable mode - the first button on the remote will activate the relay and the second will disable it.
- The OPEN position (without jumper) - Monostabil mode - is used only the first button on the transmitter for the relay command (it remains activated while the button is pressed).
LED "R1 state" is lit when R1 is active
Adding a remote controls using the THM-K06 remote control kit:
- Press the S1 button briefly (the receiver will enter in the rolling mode);
- Press the desired button on the remote control (the led will blink to confirm the successful rollout;
- Repeat steps for each remote control or plug-in button.
Delete the memberships: it is done by pressing the S1 button for 8 seconds.
| Technical specifications remote control kit: | |
| Common: | 433.92 MHz |
| Operating voltage: | 12 Vcc |
| Unit dimensions: | 55 x 38 x 22 mm |
| Transmission-reception distance: | 60 m (in open field) |
| Current consumption: | 10mA (in stand-by mode), 41mA (active relay) |
| Exit relay: | CO-COM-NO |
Technical specifications
| Product code | THM-K06 |
|---|