Compatible remote control TRD TX MULTI
TRD TX MULTI compatible remote control is a remote control compatible with most of the original remote control brands, with rolling code or fixed code.

Description
TX MULTI TRD remote control has 4 channels and is compatible with most brands of remote controls on the market, with fixed code or jumper. It works as a replacement for the original remote control and can be programmed from the receiver in the same way.
The remote control programming is made easy, respecting the steps of the manual of use, by placing the dip-switch in certain positions. Choose the desired remote control brand, then program as an original remote control.
Preparation of the remote control for use:
- Locate the dip switch (brand switch) on the back of the remote control;
- Use a paper clip or other small object to remove the protective layer and expose the dip-switch;
- Set the dip-switch for the desired brand, according to the instructions on the slot.
Brand selection
- Press the button you want to use. The led will flash a number of times equivalent to the brand it is set for.
- Release the button. If the number of clips is correct, confirm the selection and exit the programming mode. If the brand is not the right one, continue with the next step.
- To change the brand, press the same button again and hold, watching the led whenever it flashes. When you reach the desired number of clips, release the button.
Confirmation of the choice and exit from the programming mode
- Hold simultaneously the last 2 buttons (the smallest) at the base, for approx. 7 seconds;
- When the led starts blinking easily, release the buttons.
| Technical characteristics: | |
| Common: | 433.92 MHz |
| Model: | TRD TX MULTI |
| Feed: | 3V/ 2 batteries CR2025 |
| Number of channels: | 4 |
List of compatibilities
Technical specifications
| Product code | TRDTXMULTI |
|---|