THM-K09 remote control kit
The THM-K9 remote control kit contains a set with a receiver and a transmitter.



Description
The THM-K09 remote control kit is used in access control systems, for actuating doors with electrical locks (electromagnetes, electric bolts). The remote control has 2 relays (set with a transmitter and receiver). The unit allows up to 30 users to join.
The inner jumper (JP-OUT) determines the mode of action of the relay:
- Position 1-2, monostabil mode: For each relay, a button is used that remains activated as long as it is pressed.The first pressed button activates the first relay and the second pressed button - the second relay.
- Position 2-3, bistabile mode: The remote control programming is done just as in the 1-2 position, only that the relay remains activated until a new button click.
- The "Open" position, the bistabile way: Remote controls can be used with 2 and 4 buttons.
Adding a remote controls using the remote control kit:
- Press the short S1 button, the receiver will enter the enlistment mode (the LED will stay on).
- Press two buttons on the remote control (the LED will blink at the click of each button, when the registration is successful and then it will go out).
For reset: Press the S1 button for approx. Five seconds.
| Technical specifications remote control kit THM-K9: | |
| Common: | 433 MHz |
| Operating voltage: | 12Vcc |
| Unit size: | 82 x 44 x 27 mm |
| Range of action: | 50-60m (in open field) |
| Capacity: | 30 users |
| Current: | 8 mA (stand-by), 37 mA (an active relay), 67 mA (both active relays) |
Technical specifications
| Product code | THM-K09 |
|---|