Kit remote control THM-K08
THM-K08 remote control kit used in access control systems, for actuating doors with electrical locks is a set with a remote control and a receiver.




Description
The THM-K08 remote control kit is composed of a receiver unit with a channel and a remote control with 2 buttons. The unit allows 300 users to join.
The remote control kit works in two ways: monostable and bestable.
Programming using the THM-K08 remote control kit:
The mode of action of the relay is set according to the position of the inner jumper as follows:
- Position 1-2 - Bistable mode - the first button on the transmitter is used for the control of the relay and remains activated until a new button is pressed.
- Position 2-3 - Bistable mode - the first button on the remote will activate the relay and the second will disable it.
- The OPEN position (without jumper) - Monostabil mode - is used only the first button on the transmitter for the relay command (it remains activated while the button is pressed).
The "R1 state" LED is lit when R1 is active.
Adding a remote control with the THM-K07 remote control kit:
- Press the S1 button briefly (the receiver will enter in the rolling mode);
- Press the desired button on the remote control (the led will blink to confirm the successful rollout;
- Repeat steps for each remote control or plug-in button.
Delete the memberships: it is done by pressing the S1 button for 8 seconds.
| Technical specifications remote control kit: | |
| Common: | 433.92 MHz |
| Operating voltage: | 12 Vcc |
| Unit dimensions: | 55 x 38 x 22 mm |
| Transmission-reception distance: | 60 m (in open field) |
| Current consumption: | 10mA (in stand-by mode), 41mA (active relay) |
| Exit relay: | CO-COM-NO |
Technical specifications
| Product code | THM-K08 |
|---|