Remote control Came TWIN 2
The CAME TWIN 2 remote control is a 2-channel automation remote control and dip-switch encoding, with 433.92 MHz frequency. The Came TWIN 2 remote is equipped with..




Description
Came TWIN 2 remote control is a radio remote with 2 channels and 433.92 MHz frequency, representing an automation remote control that can store codes using 10 dip-switch combinations.
Came TWIN 2 remote is equipped with signal led, 2 buttons, keys dip-switch and AF43TW receiver card. There is the possibility of different encoding for each transmitter button, each code being recognized by a different type of light-signalling.
Mode Key-block is recognized by three light signals, followed by a pause. When the remote control is found in this way, its functions can no longer be cloned on another transmitter. Duplication of the remote control in the Key-Block mode represents a process that allows copying the codes, from a TWIN operating remote, located in the Key Block mode on a new TWIN remote.
Code entry procedure in Key-Block mode:
- Choose the desired combination (on/off) of the dip-switch keys, to get the code and note this code on the special grid, with a pencil. Configure the dip-switch code on the remote control;
- Press both remote control buttons simultaneously. The led will start to blink quickly.
- Release only the first button: the led will continue to blink quickly for 4 seconds;
- After the 4 seconds pass, the led will remain lit intermittently, when you can release the 2nd button.
- The dip-switch code you set up is now in the remote control memory.
| Technical specifications remote control Came TWIN 2: | |
| Common: | 433.92 MHz |
| Transmission distance: | 50-150 m |
| Dimensions: | 72x35x12 mm |
| Type Battery: | CR2016 3Vdc Litiu |
| Operating temperature | -20 - + 60° C |
| Encrypt: | dip-switch |
Technical specifications
| Manufacturer | CAME |
|---|---|
| Product code | TCTWIN2 |